■ 用途：
LYC型精密濾油機不僅適合于各類液壓油、潤滑油的過濾凈化，而且廣泛用于電站、電廠、變電工區、石油、化工、冶金、鋼鐵、交通、拖拉機站、國防工業等單位過濾凈化絕緣油、透平油、潤滑油、液壓油、機械油等液體油液中的雜質微粒，能達到廢油再生的目的。
■ 工作原理：
本精密濾油機是在動力電源的驅動下使油液經粗濾器濾除大顆粒雜質，然后，油液在流經一級精過濾器時，大于10-20μm雜質微粒被濾除，Z后，游液進入二級精過濾器，油中的細小微粒被*濾除去。過濾器過濾芯精度根據用戶要求配置，Z高可達1μm 油液清潔度Z高可達NAS1638 6級。
■ 結構：
●精密濾油機主要有由粗濾器、齒輪油泵、一級精過濾器、二級精過濾器、安全閥、壓力表、進出口閥門及移動小車組成。
●粗過濾器是一個網式過濾器，分兩級粗過濾，濾網為不銹鋼網，一級為40目，二級為60目。
●精過濾元件是由棉脫脂后的棉纖維濾層材料纏繞在多孔不銹鋼骨架上形成蜂房式濾芯。本濾芯孔徑外大內小，具有優良的深層過濾效果。
●齒輪油泵設有安全閥（出廠時安全閥壓力調節在工作壓力的150%左右）。

Model LYC Fine Oil Filter is mainly used for removing impurities and granis grom insulation oil,turbine oil,lube oil,bydraulic oil and mechanical oil.、

OPERATION PRINCIPLE

1. Oil is delivered into coarse filter where big particles are removed and then oil passes through Stage 1 Fine Filter where impatities above 10-20μmare filtered out and finally,oil passes though Stage 2 Fine Filter where tiny particles are thoroughiy removed.Filter cores can be matched according to user’s requirements.Filter cores up to 1μm can be available.

Cleanness of oil treated can reach to NAS1638 class 6.

STRUCTURE
●Fine filter manly consists of corarse filter,Stage 1 fine Filter,Stage 2 Fine Filter,a safety valve,a pressure gauge,inlet/outlet valve and a movable trolley.
●Coarse filter tis of screened one,which is composed of? two stages of filtering.And screen is made of stainless steel.First stage is of 40 mesh and second stage is of 60 mesh.
Fine filterelement is honeycomb filter core.The filtercore has bigger outer diameter and smaller ●inner diameter,having good filtering result.
●Gear oil plump is grovided with a safety valve.
T valve was set to 150% of operating pressure when it left factory.
●The follows are your optins.

■ 主要技術參數：Main technical parameters